It is recommended to use the Auto Pre Feed feature on the cutter to ensure enough slack is left between the roll of material and cutter so that it doesn’t pull against the roll during the cut job.

To enable the Auto Pre Feed option:

  • Press the [MENU] key.
  • Press the [4] key (MEDIA).
  • Press the [2] key (AUTO PRE FEED).
  • Press the [1] key.
  • Press the [1] key (ON) or the [2] key (OFF).
  • Press the [2] key (FEED LENGTH).
  • Press the POSITION (▲▼) key and increase or decrease the setting value.
  • Confirm the setting value, and press the POSITION (◄) key (PREVIOUS).
  • Confirm the setting and press the [ENTER] key.
  • Press the [MENU] key.
(Visited 26 times, 1 visits today)