Graphtec Cutters Archives – Page 3 of 5 – SignWarehouse Product Support

Manually Adjusting the Mark Sensor Offset

by SW Admin | Feb 10, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64, Vinyl Express

This article provides instructions for manually adjusting the mark sensor offset. We are referring to the difference between scanned registration marks and the actual cutting position. Download and print the Registration Mark Template; then, proceed to Step 1. Load...

ARMS Activation and Settings

by SW Admin | Feb 10, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64

This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) activate and adjust the ARMS settings on their equipment. Press the [MENU] key. MENU screen is displayed. Press the [2] key (ARMS). ARMS setting screen (1/4) is displayed....

Adjusting the Registration Mark Sensor Sensitivity

by SW Admin | Feb 9, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64, Vinyl Express

If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. How to Adjust the Auto-Registration Mark Sensor Sensitivity Enter the adjustment menu. Turn on the power while pressing the...

Calibrating the Mark Sensor Position

by SW Admin | Feb 9, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64, Vinyl Express

After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24, 30, 42, 54, 64), operators need to calibrate its positioning. How to Adjust the Auto-Registration Mark Sensor Enter the adjustment menu. Turn on the power while pressing the FAST...

Why Isn’t My Vinyl Tracking Properly?

by SW Admin | Jan 29, 2015 | enduraCUT, Graphtec Cutters, Q Series, R Series, Roland Cutters, VE Q24/30/42/54/64, VE Q60/75/100/130/160, VE Qe60/60 Plus/6000, Vinyl Cutters, Vinyl Express

Basic Tracking Trouble-Shooting As simple as it seems, a major reason for poor tracking is improper alignment of sign vinyl. Long runs will be impossible to accomplish without learning to load and align vinyl properly. Take at least 30 minutes when receiving cutter /...

Contour Cutting (Print and Cut) with Q-Series or Graphtec Cutters

by SW Admin | Jan 21, 2015 | FlexiSignPro, Graphtec Cutters

The first step to contour cutting is adding a contour line to your image. This line shows as a light gray color and does not print. It just lets the cutter know where to cut. Select the image then select [Effects] then [Contour Cut]. The Contour options box should...