VE Qe60/60 Plus/6000 Archives – SignWarehouse Product Support

Vinyl Express Qe6000 USB Driver Solution

by Jerry Barrax | Sep 28, 2022 | Q Series, Uncategorized, VE Legacy, VE Qe60/60 Plus/6000, Vinyl Cutters, Vinyl Express

As computer technology advances, it becomes harder to continue to use older equipment. This has been the case for a while with vinyl cutters. Many legacy cutters were made to interface with 16 and 32-bit operating systems like Windows 7. They don’t work well with...

Replacing a Q-Series Pinch Roller

by Erin Almonte | Nov 9, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64, VE Q60/75/100/130/160, VE Qe60/60 Plus/6000

Replacing the Q-Series pinch roller on a Q-series cutter is easy in theory, but not always in practice. Full disclosure, the process can be a bit tedious. Still, with the right tools including a healthy dose of determination, anyone can do it. Be sure to read through...

Restore Language Settings on Q-Series and Graphtec Cutters

by Erin Almonte | Feb 20, 2015 | Graphtec Cutters, VE Q24/30/42/54/64, VE Qe60/60 Plus/6000

To change the language on a Graphtec cutter/plotter, follow the following instructions. Press the Menu button Press the Down Position Arrow one time to access the Advanced menu Press the #2 button to access Language Selection Use the Up/Down arrow buttons to cycle...

Adjusting the Cross Cutter Home Position

by Erin Almonte | Feb 13, 2015 | Graphtec Cutters, Q Series, VE Q24/30/42/54/64, VE Q60/75/100/130/160, VE Qe60/60 Plus/6000, Vinyl Cutters

This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the Cross Cutter Home Position Turn on the power while simultaneously pressing the FAST and...

Cutter Protection Strip

by Erin Almonte | Feb 12, 2015 | enduraCUT, Graphtec Cutters, Q Series, R Series, Roland Cutters, VE Legacy, VE Q24/30/42/54/64, VE Q60/75/100/130/160, VE Qe60/60 Plus/6000, Vinyl Cutters, Vinyl Express

On every new vinyl cutter, you will find a Cutter Protection Strip. The cutter protection strip runs the length of the machine directly under the blade’s path of travel. If no material were loaded, the blade would actually hit or cut the strip. The purpose of...