Make sure the machine is on a level surface. An unlevel surface can cause the roll of vinyl to “walk” as it unrolls. Pull a few feet of material through the machine making sure that it stays in alignment with the roll of material. Line up the RIGHT EDGE of the material with one of the ridges along the front of the machine and raise the lever to lock down the pinch rollers. Choose Roll1 to have the machine pull the material back to the front edge. As it does this, watch the right edge of the material to make sure it follows along the same line you used when loading the material. If it doesn’t follow the same line raise the pinch rollers and try again after adjusting the material.

(Visited 132 times, 2 visits today)